|
|
 Best Sellers Best Sellers | | Featured Categories |  | |  | | | | | | | | | | |
List Price:
| | |
You Save:
| | |
*Shipping:
| |
| | | SKU:
| | Availability:
Out of stock | | |
|
| | Description | | |
| | Product Details | | Product Length: | 11.89 inches | | Product Width: | 4.45 inches | | Product Height: | 10.04 inches | | Package Length: | 12.5 inches | | Package Width: | 10.3 inches | | Package Height: | 4.8 inches | | Package Weight: | 5.65 pounds | | Average Customer Rating: |  based on 2 reviews |
| |
| | Customer Reviews | Average Customer Review: ( 2 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
3 of 3 found the following review helpful:
Perfect Jul 10, 2009
By Di Monaco
I'm very happy with my new Saffire. Great sound, great pre-amps, latency very close to zero, very portable for a FW audio interface, a great compressor among the DSP plugins. Nothing to complain about it. Note: I'm working on a Core Duo Mac Book Pro, with 4GB of RAM and running Logic Pro 8.
2 of 14 found the following review helpful:
verey good Mar 06, 2009
By Mazzen Alhejjy
SYSTEM REQUIREMENTS, PERFORMANCE AND SPECIFICATION
WINDOWS
Operating System
* Windows® XP Service Pack 2 (Home, Professional, 64bit XP or Media Centre Edition) or Windows Vista (32bit and 64bit - all versions)
Computer
* Windows® XP compatible PC
* 400Mb/s IEEE1394/FireWire port (OHCI compliant recommended)
CPU/Clock
* 1.4 GHz Intel or compatible
* 2.0 GHz Pentium© 4 or Xeon recommended for 192kHz operation
Memory (RAM)
* 256MB or more
* 512MB or higher recommended
APPLE MAC
Operating System
* Mac OS X Panther (10.3.3 or later) - Mac OS update may be required
Computer
* Apple Mac Power PC G4, G5 or Intel Mac (any)
CPU/Clock
* G4/800 MHz (minimum)
* G4/1.5GHZ or higher recommended for 192kHz operation
Memory (RAM)
* 256MB or more
* 512MB or higher recommended
ADDITIONAL INFO
* Firewire chipsets from TI (Texas Instruments), VIA, and NEC are recommended
* It is highly recommended that Saffire be run on its own Firewire bus/card
* In order to use Saffire with a 4-pin IEEE1394 port you will need a 4-pin to 6-pin cable (not included) and must use the PSU (included)
Mic
* Frequency Response: 20Hz - 20kHz +/- 0.1 dB
* THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
* Noise: EIN > 120dB (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
Line
* Frequency Response: 20Hz - 20kHz +/- 0.1dB
* THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
* Noise: -88dBu (22Hz/22kHz bandpass filter)
Instrument
* Frequency Response: 20Hz - 20kHz +/- 0.1dB
* THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
* Noise: -87dBu (20Hz/22kHz bandpass filter)
Digital Performance
* Clock Source: Internal clock or sync to word clock on SPDIF
* A/D Dynamic Range 104dB 'A-weighted'
* D/A Dynamic Range 110dB ?A-weighted'
* Clock Jitter < 250 pico seconds
* Sample rate 44.1 to 192kHz
Weight
* 1.1kg
* 2.4Ibs
Dimensions
* 65mm (W) x 170mm (H) x 170mm (D)
* 2.6" (W) x 6.7" (H) x 6.7" (D)
Analogue inputs
* Mic: 2 x XLR on front panel
* Mic Gain: +13dB to + 60dB
* Line: 2 x 1/4" TRS Jack
* Line Gain: -10dB to +36dB
* Instrument: As above, switched to Instrument
* Instrument Gain: +13dB to +60dB
Analogue outputs
* Line level 8 x 1/4" TRS Jack
* Nominal output level 0dBFS = 16dBu, electronically balanced
* All outputs are useable as monitoring outputs
Digital I/O
* 2 x SPDIF (RCA phono) on rear panel (24-bit, 96kHz) Output transformer isolated
MIDI I/O
* 1 in / 1 out on rear panel
FirewireS400
* 2 ports
Power
* Either via FIREWIRE or external PSU (12v AC, 1.5A)
Headphone Monitoring
* 2 x 1/4" TRS Jack on front panel (mirrors outputs 5-8)
| |
| |
| |  | |  |
|
Recently Viewed | Suggested Accessories You may also like ... You may also like ... |
|
|
